I just saw in Dan Wood's video of Amiga Ireland 2020 that AmigaKit will have new expansion cards for the A1200 which have 8MB RAM and a socket for FPU. Would this make Lightwave usable on the A1200?
I have an ACA1221 which gives me @28MHz and 64MB RAM so I think I have to downgrade other things to get the FPU :~) https://youtu.be/Py4j8GZSOtI?t=251
New hardware from AmigaKit (FPU for A1200)
-
- Posts: 15
- Joined: Sun Feb 17, 2019 6:07 pm
Re: New hardware from AmigaKit (FPU for A1200)
I think that would make A1200 usable for LW 5, since there is FPU, but you are going to lose a lot of memory. With that expansion you are going to get more speed than a stock amiga, because of the extra memory and it's speed.
In my opinion this expansion targets mostly WHDload users.
In my opinion this expansion targets mostly WHDload users.
- muadib
- Site Admin
- Posts: 168
- Joined: Fri Jun 15, 2018 7:26 pm
Re: New hardware from AmigaKit (FPU for A1200)
+1walkero wrote: ↑Sun Feb 09, 2020 11:28 am I think that would make A1200 usable for LW 5, since there is FPU, but you are going to lose a lot of memory. With that expansion you are going to get more speed than a stock amiga, because of the extra memory and it's speed.
In my opinion this expansion targets mostly WHDload users.
Also, a 030+882@50MHz is kind of slow as it is with Lightwave already IMO, so a 020 would be struggling to render anything but simple scenes in Low Res .
- muadib
- Iarla
- Posts: 45
- Joined: Sun Dec 23, 2018 11:23 am
Re: New hardware from AmigaKit (FPU for A1200)
Thanks walkero & muadib. I need to be more ambitious then I could of course emulate, for the time being.